Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY
RM2090E _58 Vehicle Interior _060702 SEAT _0297720 REAR SEAT ASSEMBLY A

SEAT  REAR SEAT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 71076S 1.INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH

a.
B315744E01
0.358,2.657 0.514,2.838 0.156,0.181 10 *1 2.107,3.031 2.263,3.212 0.156,0.181 10 *2 0.716,2.882 0.542,2.758 false 1.702,3.748 2.077,3.169 false

Using hog ring pliers, install the separate type rear seat cushion cover LH to the separate type rear seat cushion pad with 3 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.



Text in Illustration
*1 Hog Ring
*2 Hog Ring Pliers


b.

Using hog ring pliers, install 40 new hog rings.

B315745E01
4.111,0.801 4.267,0.982 0.156,0.181 10 *1 5.538,1.106 5.694,1.287 0.156,0.181 10 *2 4.404,0.985 4.262,0.883 false 5.207,1.69 5.513,1.218 false

Text in Illustration
*1 Hog Ring *2 Hog Ring Pliers

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 71075S 2.INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 3.INSTALL REAR SEAT CUSHION BRACKET

a.

Install the rear seat cushion bracket to the rear seat cushion assembly LH with the screw.

HINT:

Use the same procedure as for both the LH side and RH side.



Hide 71603 4.INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY LH

a.

Install the rear seatback lock sub-assembly LH with the 2 bolts.

Torque:
25 N*m (250 kgf*cm, 18 ft.*lbf)


Hide 71602 5.INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 6.INSTALL REAR SEATBACK LOCK RELEASE KNOB

a.
B311412

Rotate the rear seatback lock release knob clockwise to install it to the rear seatback lock rod LH.

HINT:

Use the same procedure as for both the LH side and RH side.



Hide 72651E 7.INSTALL REAR SEATBACK LOCK ROD LH

a.
B311924

Connect the rear seatback lock rod LH to the rear seatback lock sub-assembly LH as shown in the illustration.


b.

Engage the claw to install the rear seatback lock rod LH.


Hide 72651D 8.INSTALL REAR SEATBACK LOCK ROD RH

HINT:

Use the same procedure as for the LH side.


Hide 71077B 9.INSTALL BENCH TYPE REAR SEATBACK COVER

a.
B311324E01
0.358,2.657 0.514,2.838 0.156,0.181 10 *1 2.107,3.031 2.263,3.212 0.156,0.181 10 *2 0.716,2.882 0.542,2.758 false 1.702,3.748 2.077,3.169 false

Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with 10 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.



Text in Illustration
*1 Hog Ring
*2 Hog Ring Pliers


Hide 10.INSTALL BENCH TYPE REAR SEATBACK COVER WITH PAD

a.

Temporarily install the bench type rear seatback cover with pad to the rear seatback frame assembly.


b.

Engage the 6 hooks to the rear seatback frame assembly.


c.

Engage the hook.


d.

Install the bench type rear seatback cover with pad with the 4 clips.


Hide 11.INSTALL REAR SEATBACK LOCK COVER

a.

Engage the guide and 3 claws to install the rear seatback lock cover.

HINT:

Use the same procedure as for both the LH side and RH side.