Home › Vehicle Interior › SEAT › SEAT HEATER SWITCH
RM2090E _58 Vehicle Interior _060702 SEAT _0297721 SEAT HEATER SWITCH G

SEAT  SEAT HEATER SWITCH  INSPECTION  


PROCEDURE

Hide 84751F 1.INSPECT SEAT HEATER SWITCH (for LH)

a.

Check the seat heater switch.

i.
B314994E01
0.132,0.035 0.376,0.221 0.244,0.185 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Seat Heater Switch (for LH))

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 ON (HI) Below 1 Ω
3 - 4 ON (HI) Below 1 Ω
2 - 4 ON (LO) Below 1 Ω


If the result is not as specified, replace the seat heater switch (for LH).



b.

Check that the indicator illuminates.

i.
B314994E01
0.132,0.035 0.376,0.221 0.244,0.185 10 *a

Apply battery voltage to the seat heater switch (for LH) and check that the indicator illuminates.

Text in Illustration
*a Component without harness connected
(Seat Heater Switch (for LH))

OK:
Condition Switch Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 3
ON (HI) Indicator illuminates
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 3
ON (LO)


If the result is not as specified, replace the seat heater switch (for LH).



Hide 84751F 2.INSPECT SEAT HEATER SWITCH (for RH)

a.

Check the seat heater switch.

i.
B314993E01
0.115,0 0.381,0.239 0.267,0.239 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Seat Heater Switch (for RH))

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 ON (HI) Below 1 Ω
3 - 4 ON (HI) Below 1 Ω
2 - 4 ON (LO) Below 1 Ω


If the result is not as specified, replace the seat heater switch (for RH).



b.

Check that the indicator illuminates.

i.
B314993E01
0.115,0 0.381,0.239 0.267,0.239 10 *a

Apply battery voltage to the seat heater switch (for RH) and check that the indicator illuminates.

Text in Illustration
*a Component without harness connected
(Seat Heater Switch (for RH))

OK:
Condition Switch Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 3
ON (HI) Indicator illuminates
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 3
ON (LO)


If the result is not as specified, replace the seat heater switch (for RH).