1.INSTALL SEPARATE TYPE FRONT SEATBACK PAD (FRONT SEATBACK HEATER ASSEMBLY)
Using hog ring pliers, install the separate type front seatback pad to the separate type front seatback cover with 14 new hog rings.
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
| *1 | Hog Ring |
| *2 | Hog Ring Pliers |
2.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
3.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
4.INSTALL FRONT SEAT INNER CUSHION SHIELD
5.INSTALL FRONT SEAT CUSHION SHIELD
6.INSTALL SEAT ADJUSTER COVER CAP
7.INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side)
8.INSTALL RECLINING ADJUSTER RELEASE HANDLE
9.INSTALL FRONT SEAT ASSEMBLY