87510L
1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (FRONT SEAT CUSHION HEATER ASSEMBLY) LH
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Separate Type Front Seat Cushion Pad LH) |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-1 - H18-3 | Always | Below 1 Ω |
| A-2 - H18-2 | Always | 6.01 to 7.33 Ω |
| H18-1 - H18-2 | Always | 6.01 to 7.33 Ω |
If the result is not as specified, replace the separate type front seat cushion pad LH.
87510K
2.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (FRONT SEAT CUSHION HEATER ASSEMBLY) RH
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Separate Type Front Seat Cushion Pad RH) |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-1 - G4-3 | Always | Below 1 Ω |
| A-2 - G4-2 | Always | 6.01 to 7.33 Ω |
| G4-1 - G4-2 | Always | 6.01 to 7.33 Ω |
If the result is not as specified, replace the separate type front seat cushion pad RH.