Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY
RM2090E _58 Vehicle Interior _060703 SEAT BELT _0297729 REAR SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73370 1.INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

a.
B311344E01
0.937,1.552 1.123,1.713 0.186,0.161 10 *c 1.165,0.129 1.351,0.290 0.186,0.161 10 *a 2.504,1.475 2.690,1.637 0.186,0.161 10 *b 2.181,1.021 2.674,0.428 2.674,0.428 1.721,0.42 false 2.723,0.328 2.909,0.489 0.186,0.161 10 *1

Before installing the rear seat 3 point type outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 12° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 27°, check that the belt locks.

Text in Illustration
*1 Retractor
*a Unlocked
*b Locked
*c 27°

If the result is not as specified, replace the rear seat 3 point type outer belt assembly.