Be sure to correctly follow the removal and installation procedures for the rear seat 3 point type outer belt assembly.
73370
1.INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)
Visually check for defects with the rear seat 3 point type outer belt assembly installed on the vehicle.
The defects are as follows:
Cuts on the rear seat 3 point type outer belt assembly
Small cracks on the rear seat 3 point type outer belt assembly
Significant discoloration on the rear seat 3 point type outer belt assembly
No defects are found.
If any of the defects is found, replace the rear seat 3 point type outer belt assembly with a new one.
73370
2.INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)
Visually check for defects with the rear seat 3 point type outer belt assembly removed from the vehicle.
The defects are as follows:
Cuts on the rear seat 3 point type outer belt assembly
Small cracks on the rear seat 3 point type outer belt assembly
Significant discoloration on the rear seat 3 point type outer belt assembly
Cracks or other damage to the connector
No defects are found.
If any of the defects is found, replace the rear seat 3 point type outer belt assembly with a new one.