Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY
RM2090E _58 Vehicle Interior _060703 SEAT BELT _0297732 FRONT SEAT INNER BELT ASSEMBLY G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

a.
B271232E04
0.205,0.166 0.357,0.303 0.151,0.137 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Driver seat belt unfastened Below 1 Ω
1 - 2 Driver seat belt fastened 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Front Seat Inner Belt Assembly (for Driver Side))

If the result is not as specified, replace the front seat inner belt assembly (for Driver Side).


Hide 73230 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

a.
U190228E02
1.573,2.406 1.802,2.573 0.229,0.167 10 false G3 1.604,0.542 1.74,0.698 0.135,0.156 10 false A 0.146,0.052 0.333,0.208 0.188,0.156 10 false *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-2 - G3-2 Always Below 1 Ω
A-1 - G3-1 Driver seat belt unfastened Below 1 Ω
A-1 - G3-1 Driver seat belt fastened 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Front Seat Inner Belt Assembly (for Front Passenger Side))

If the result is not as specified, replace the front seat inner belt assembly (for Front Passenger Side).