Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM2090E _58 Vehicle Interior _060703 SEAT BELT _0297733 OCCUPANT DETECTION SENSOR G

SEAT BELT  OCCUPANT DETECTION SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

B218574E01
0.146,0.125 0.303,0.276 0.157,0.151 10 *a

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Front passenger seat occupied Below 100 Ω
1 - 3 Front passenger seat not occupied 1 MΩ or higher


If the result is not as specified, replace the separate type front seat cushion pad.

Text in Illustration
*a Component without harness connected
(Separate Type Front Seat Cushion Pad (Occupant Detection Sensor))