Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM2090E _58 Vehicle Interior _060703 SEAT BELT _0297733 OCCUPANT DETECTION SENSOR A

SEAT BELT  OCCUPANT DETECTION SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the front passenger side of RHD and LHD vehicles.

·

The procedures listed below are for the front passenger side of an LHD vehicle.



PROCEDURE

Hide 1.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

HINT:

Use the same procedure as for the driver seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY>REMOVAL).


Hide 2.REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

a.
B279522

Remove the 2 hog rings.


b.
B299980

Remove the 12 hog rings and the separate type front seat cushion pad from the separate type front seat cushion cover.