Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)
RM2090E _58 Vehicle Interior _060704 HEATING / AIR CONDITIONING _0297735 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  SYSTEM DESCRIPTION  


GENERAL


a.

The air conditioning system has the following controls.

Control Outline
Air Inlet Control Drives the servo motor (for air inlet) according to the operation of the air inlet control switch and moves the dampers to the FRESH or RECIRC position.



MODE POSITION AND DAMPER OPERATION


a.

Mode Position and Damper Operation

U147254E02
2.531,1.229 2.792,0.542 2.792,0.542 2.958,0.542 false 5.875,1.677 6.323,1.177 6.323,1.177 6.5,1.177 true 4.156,1.688 3.979,1.094 3.979,1.094 3.854,1.094 true 4.99,1.917 4.552,0.667 4.552,0.667 4.427,0.667 true 1.792,2.417 1.469,2.917 1.469,2.917 1.313,2.917 true 3.542,2.344 3.063,3.125 3.063,3.125 2.917,3.125 true 3.875,2.531 4.135,3.448 4.135,3.448 4.292,3.448 true 2.99,0.479 3.146,0.625 0.156,0.146 10 false *1 1.542,0.875 1.698,1.021 0.156,0.146 10 false *3 2.781,0.875 2.938,1.021 0.156,0.146 10 false *2 1.104,2.854 1.26,3 0.156,0.146 10 false *4 2.698,3.063 2.854,3.208 0.156,0.146 10 false *5 4.344,3.375 4.5,3.521 0.156,0.146 10 false *6 4.49,3.115 4.646,3.26 0.156,0.146 10 false *7 4.917,3.115 5.073,3.26 0.156,0.146 10 false *8 5.802,2.656 5.958,2.802 0.156,0.146 10 false *9 4.167,0.604 4.396,0.75 0.229,0.146 10 false *10 5.74,0.833 5.969,0.979 0.229,0.146 10 false *11 6.563,1.115 6.792,1.26 0.229,0.146 10 false *10 3.583,1.031 3.813,1.177 0.229,0.146 10 false *12 2.375,1.417 2.49,1.563 0.115,0.146 10 false A 1.969,1.417 2.083,1.563 0.115,0.146 10 false B 3.969,1.813 4.083,1.958 0.115,0.146 10 false C 3.969,2.344 4.083,2.49 0.115,0.146 10 false D 4.667,1.573 4.781,1.719 0.115,0.146 10 false E 2.375,1.417 2.49,1.563 0.115,0.146 10 false A 4.521,2.344 4.635,2.49 0.115,0.146 10 false F 4.646,2.563 4.781,2.708 0.135,0.146 10 false G 5.5,1.479 5.615,1.625 0.115,0.146 10 false H 5.438,1.75 5.5,1.896 0.063,0.146 10 false I 5.448,1.906 5.542,2.052 0.094,0.146 10 false J 5.521,2.063 5.635,2.208 0.115,0.146 10 false K

Functions of Main Dampers:
Control Damper Operation Position Damper Position Operation
Air Inlet Control Damper FRESH A Brings in fresh air.
RECIRCULATION B Recirculates intermal air.
Air Mix Control Damper MAX COLD to MAX HOT Temperature Setting C - D (C' - D') Varies the mixture ratio of warm air and cool air in order to regulate the temperature continuously between hot and cold.
Mode Control Door
E264852

FACE E, H, Air blows out of the center register and side register ducts.
E264849

BI-LEVEL F, H, Air blows out of the center register, side register and footwell register ducts.
E264850

FOOT G, I, Air blows out of the footwell register and side register ducts. In addition, air blows out slightly from the front defroster and side defroster.
E264851

FOOT AND DEFROSTER G, J, Defrosts the windshield through the front defroster, side defroster and side register ducts, while air is also blown out from footwell register ducts.
E264847

DEFROSTER G, K, Defrosts the windshield through the front defroster, side defroster and side register ducts.



AIR OUTLETS AND AIRFLOW VOLUME


a.

Air Outlets and Airflow Volume

Y120200

Indication MODE Face Footwell Defroster
Center Side Front Side
A B C D E
E264852

FACE
E361805

E361805

E334243

E334243

E334243

E264849

BI-LEVEL
E361743

E361743

E361743

E334243

E334243

E264850

FOOT
E334243

E361744

E361740

E361744

E361744

E264851

FOOT AND DEFROSTER
E334243

E361744

E361743

E361743

E361743

E264847

F/D
E334243

E361744

E334243

E361739

E361739


The size of each circle ○ indicates the ratio of airflow volume.



COMPRESSOR


a.

General:

i.

A compact and high performance scroll compressor with separator has been adopted.

Y120198


ii.

The scroll compressor with oil separator consists of a spirally wound fixed scroll and rotating scroll that from a pair, and oil separator, and a magnetic clutch.

The fixed scroll is integrated with the housing. Because the rotation of the shaft causes the rotating scroll to revolve while maintaining the same posture, the volume of the space that is partitioned by both scrolls varies to perform the suction, compression, and the discharge of the refrigerant gas.

A pin is attached behind the rotating scroll to prevent the autorotation of the rotating scroll, allowing it only to revolve.

Locating the suction port directly above the scrolls enables direct suction, thus realizing improved suction efficiency.

Containing a built-in oil separator, this compressor is able to separate the compressor oil that is intermixed with the refrigerant and circulates in the refrigeration cycle, thus realizing a reduction in the oil circulation rate.

Y120415E05
2.01,1.313 2.292,0.448 2.292,0.448 2.479,0.448 true 1.615,1.531 1.271,0.5 1.271,0.5 1.063,0.5 true 1.302,1.531 0.74,0.854 0.74,0.854 0.563,0.854 true 1.073,2.021 0.385,2.781 0.385,2.781 0.208,2.781 true 1.281,2.438 0.823,3.302 0.823,3.302 0.719,3.302 true 2.042,2 2.417,3.406 2.417,3.406 2.604,3.406 true 4.385,1.719 3.938,0.885 3.938,0.885 3.719,0.885 true 6.104,1.76 6.479,0.74 6.479,0.74 6.667,0.74 true 2.521,0.385 2.698,0.563 0.177,0.177 10 false *1 6.719,0.667 6.896,0.844 0.177,0.177 10 false *1 0.854,0.427 1.042,0.604 0.188,0.177 10 false *2 3.531,0.813 3.708,1 0.177,0.188 10 false *2 0.042,2.708 0.208,2.885 0.167,0.177 10 false *4 0.5,3.24 0.688,3.417 0.188,0.177 10 false *3 2.646,3.313 2.823,3.49 0.177,0.177 10 false *5 0.365,0.781 0.531,0.948 0.167,0.167 10 false *3

Text in Illustration
*1 Fixed Scroll *2 Rotating Scroll
*3 Pins *4 Shaft
*5 Discharge Port - -


iii.

A CS (Centrifugal with Shutter) type oil separator has been adopted to reduce the circulation rate of the compressor oil that is intermixed with the refrigerant and circulates in the refrigeration cycle.

This oil separator is provided with a cylindrical pipe in the separator case, enabling the refrigerant gas that has been discharged through the discharge gas inlet to be separated into refrigerant gas and oil through centrifugal force, and minimizing the outflow of the oil to the discharge service port. As a result, the oil circulation rate has been reduced and makes energy savings possible.

Y120416E04
4.906,1.802 6.125,1.802 true 4.74,1.01 5.104,0.406 5.104,0.406 5.271,0.406 true 3.844,1.813 3.385,2.042 3.385,2.042 3.24,2.042 true 4.375,2.688 4.833,3.063 4.833,3.063 5.01,3.063 true 2.698,1.177 2.938,1.635 2.938,1.635 3.073,1.635 true 2.792,3.021 2.49,2.281 2.49,2.281 2.344,2.281 true 5.344,0.323 5.521,0.5 0.177,0.177 10 false *b 3.063,0.438 3.25,0.635 0.188,0.198 10 false *1 3.135,1.573 3.313,1.75 0.177,0.177 10 false *3 2.156,2.229 2.323,2.396 0.167,0.167 10 false *3 3.042,1.969 3.198,2.135 0.156,0.167 10 false *5 5.063,3 5.25,3.198 0.188,0.198 10 false *5 2.958,3.25 3.146,3.448 0.188,0.198 10 false *4 6.188,1.719 6.375,1.917 0.188,0.198 10 false *a 4.552,2.135 4.74,2.333 0.188,0.198 10 false *6 5.042,1.5 5.229,1.698 0.188,0.198 10 false *7 1.573,2.323 1.74,2.49 0.167,0.167 10 false *2

Text in Illustration
*1 Cooler Condenser Assembly and Modulator *2 Cooler Expansion Valve
*3 Refrigerant Gas + Compressor Oil *4 No. 1 Cooler Evaporator Sub-assembly
*5 Oil *6 Compressor Assembly
*7 Oil Separator - -
*a Oil Circulation Ratio of 4% *b Oil Circulation Ratio of 1%



b.

Compressor Operation:

i.

As the capacity of the compression chamber, which is created between the rotating scroll and the fixed scroll, increases in accordance with the revolution of the rotating scroll, refrigerant gas is drawn in from the intake port.


ii.

From the state at which the suction process has been completed, as the revolution of the rotating scroll advances further, the capacity of the compression chamber decreases gradually. Consequently, the refrigerant gas that has been drawn in becomes compressed gradually and is sent to the center of the fixed scroll. The compression of the refrigerant gas is completed when the rotating scroll completes approximately 2 revolutions.


iii.

When the compression of the refrigerant gas is completed and the refrigerant pressure becomes high, the refrigerant gas discharges through the discharge port located in the center of the fixed scroll by pushing the discharge valve.

Y120417E04
1.833,2.073 2.208,2.552 2.208,2.552 2.292,2.552 true 1.354,2.188 0.979,2.542 0.979,2.542 0.844,2.542 true 2.052,1.615 2.365,1.125 2.365,1.125 2.49,1.125 true 1.552,1.813 0.844,1.208 0.844,1.208 0.667,1.208 true 2.427,0.74 2.615,0.917 0.188,0.177 10 false *1 0.458,1.135 0.635,1.292 0.177,0.156 10 false *4 0.635,2.469 0.823,2.667 0.188,0.198 10 false *5 2.323,2.479 2.51,2.677 0.188,0.198 10 false *6 2.51,1.042 2.677,1.208 0.167,0.167 10 false *7 0.448,5.542 0.635,5.74 0.188,0.198 10 false *2 6.521,4.25 6.708,4.448 0.188,0.198 10 false *3

Text in Illustration
*1 Suction *2 Discharge
*3 Compression *4 Discharge Port
*5 Rotating Scroll *6 Fixed Scroll
*7 Intake Port - -


iv.

The refrigerant gas that is discharged from the discharge port flows by rotating around the cylindrical pipe in the oil separator. At this time, the centrifugal force that is created during the rotation separates the refrigerant gas and the compressor oil due to the difference in their specific gravity. The refrigerant gas with the lighter specific gravity passes through the inside of the pipe and travels from the discharge service port to the outside of the compressor. The compressor oil with the heavier specific gravity is discharged through the oil discharge hole in the shutter and is stored in the oil storage chamber. Then, the compressor oil is fed again into the compressor and circulates inside the compressor.

Y120418E03
2.375,1.021 2.563,0.51 2.563,0.51 2.75,0.51 true 2.427,1.563 2.781,1.083 2.781,1.083 2.969,1.083 true 2.427,1.948 2.781,1.469 2.781,1.469 2.969,1.469 true 2.448,2.229 2.802,1.885 2.802,1.885 2.99,1.885 true 2.313,2.25 2.792,2.583 2.792,2.583 2.979,2.583 true 2.229,2.24 2.833,3.292 2.833,3.292 3.021,3.292 true 2.323,2.615 2.583,3.604 2.583,3.604 2.771,3.604 true 5.375,1.813 5,1.344 5,1.344 4.854,1.344 true 2.083,1.281 1.677,0.635 1.677,0.635 1.531,0.635 true 2.25,2.5 1.792,3.469 1.792,3.469 1.656,3.469 true 5.438,2.583 5.99,1.979 5.99,1.979 6.177,1.979 true 5.438,2.792 6.01,2.469 6.01,2.469 6.198,2.469 true 5.583,3.115 6.073,2.865 6.073,2.865 6.26,2.865 true 2.802,0.427 2.979,0.604 0.177,0.177 10 false *6 3.021,1.01 3.198,1.177 0.177,0.167 10 false *7 3.021,1.385 3.219,1.542 0.198,0.156 10 false *8 3.042,1.813 3.219,1.979 0.177,0.167 10 false *4 3.021,2.5 3.198,2.677 0.177,0.177 10 false *9 3.083,3.219 3.271,3.396 0.188,0.177 10 false *2 2.792,3.531 3.021,3.708 0.229,0.177 10 false *4 4.667,1.26 4.854,1.438 0.188,0.177 10 false *3 1.344,0.552 1.531,0.729 0.188,0.177 10 false *5 1.385,3.385 1.615,3.563 0.229,0.177 10 false *10 6.229,1.906 6.417,2.083 0.188,0.177 10 false *2 6.26,2.396 6.427,2.573 0.167,0.177 10 false *4 6.292,2.781 6.458,2.958 0.167,0.177 10 false *4 5.469,0.5 5.646,0.688 0.177,0.188 10 false *1

Text in Illustration
*1 Refrigerant *2 Shutter
*3 Refrigerant and Compressor Oil *4 Compressor Oil
*5 Valve Chamber D *6 Service Port
*7 Pipe *8 Case
*9 Oil Discharge Hole *10 Oil Storage Chamber




EVAPORATOR TEMPERATURE SENSOR (NO. 1 COOLER THERMISTOR)


The evaporator temperature sensor (No. 1 cooler thermistor) detects the temperature of the cooled air immediately past the evaporator in the form of resistance changes, and outputs this data to the main body ECU (network gateway ECU).


AIR CONDITIONING PRESSURE SWITCH


The air conditioning pressure switch (airconditioner tube assembly) uses refrigerant pressure to output an on/off signal to the ECM to control the compressor with magnet clutch.