55550
1.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
85530
2.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
Using a screw driver with its tip wrapped in protective tape, remove the No. 1 power outlet socket assembly while pressing the inside claw.
| *1 | Protective Tape |
Disconnect the connector and remove the No. 1 power outlet socket assembly.
If it is difficult to remove the No. 1 power outlet socket assembly, remove the lower instrument panel sub-assembly first and disengage the claw in the back.
82620C
3.REMOVE CLIP
Disengage the 2 claws and remove the clip.