55844
1.REMOVE NO. 2 HEATER TO REGISTER DUCT
Remove the 3 screws.
Disengage the claw to remove the No. 2 heater to register duct.
55843A
2.REMOVE NO. 1 HEATER TO REGISTER DUCT
Use the same procedure as for the No. 2 heater to register duct.
55950G
3.REMOVE DEFROSTER NOZZLE ASSEMBLY
Remove the 3 screws.
Disengage the 5 claws and remove the defroster nozzle assembly, No. 2 heater to register duct, and No. 1 heater to register duct as a single unit.
55972C
4.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
Disengage the 2 claws to remove the No. 2 side defroster nozzle duct.
55971C
5.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
Use the same procedure as for the No. 2 side defroster nozzle duct.
55983
6.REMOVE NO. 3 DEFROSTER NOZZLE GARNISH
Disengage the 2 claws to remove the No. 3 defroster nozzle garnish.
55982
7.REMOVE NO. 2 DEFROSTER NOZZLE GARNISH
Use the same procedure as for the No. 3 defroster nozzle garnish.
55670A
8.REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
Remove the 2 screws.
Disengage the 2 clips to remove the center instrument panel register assembly.
55062
9.REMOVE NO. 2 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY
Disengage the 3 claws to remove the No. 2 instrument panel register sub-assembly.
55061
10.REMOVE NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY
Use the same procedure as for the No. 2 instrument panel register sub-assembly.
55650B
11.REMOVE INSTRUMENT PANEL REGISTER BEZEL (for LH Side)
Disengage the 3 claws to remove the instrument panel register bezel.
55650B
12.REMOVE INSTRUMENT PANEL REGISTER BEZEL (for RH Side)
Use the same procedure as for the LH side
55981
13.REMOVE NO. 1 DEFROSTER NOZZLE GARNISH
Disengage the 16 claws and 8 guides to remove the No. 1 defroster nozzle garnish.
55349A
14.REMOVE INSTRUMENT PANEL CUSHION
Remove the instrument panel cushion.