Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › 2012.03–2019.03
RM2090E _58 Vehicle Interior _060706 INTERIOR PANELS / TRIM _0297758 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  REASSEMBLY  


PROCEDURE

Hide 86101J 1.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 82171 2.INSTALL NO. 1 ROOF WIRE (w/ Illumination)

a.

Engage the 2 guides and position the No. 1 roof wire as shown in the illumination.

B310235E01
3.477,0.733 3.651,0.905 0.174,0.172 10 *a 1.777,3.382 1.951,3.554 0.174,0.172 10 *b 1.339,1.389 1.513,1.560 0.174,0.172 10 *b 1.578,2.336 1.752,2.507 0.174,0.172 10 *c 3.523,0.487 3.554,0.733 false 1.622,1.361 1.497,1.431 false 1.433,2.319 1.566,2.414 false 1.629,3.379 1.762,3.445 false

NOTICE:

Make sure that the No. 1 roof wire is not twisted and that the marking line (white) faces up.


Text in Illustration
*a Align the center of the white tape on the wire with the edge of the trim, and fix the wire in place. *b Align the edge of the white tape on the wire with the sun visor mounting.
*c Align the white tape on the wire with the clip, and fix the wire in place. - -
V100146

Tape - -


b.

Apply tape as shown in the illustration.


Hide 82171 3.INSTALL NO. 1 ROOF WIRE (w/o Illumination)

a.

Engage the 2 guides and position the No. 1 roof wire as shown in the illumination.

B317713E01
3.477,0.714 3.651,0.886 0.174,0.172 10 *a 1.339,1.37 1.513,1.541 0.174,0.172 10 *b 1.578,2.317 1.753,2.488 0.174,0.172 10 *c 3.523,0.468 3.554,0.714 false 1.622,1.342 1.498,1.412 false 1.433,2.3 1.567,2.395 false

NOTICE:

Make sure that the No. 1 roof wire is not twisted and that the marking line (white) faces up.


Text in Illustration
*a Align the center of the white tape on the wire with the edge of the trim, and fix the wire in place. *b Align the edge of the white tape on the wire with the sun visor mounting.
*c Align the white tape on the wire with the clip, and fix the wire in place. - -
V100146

Tape - -


b.

Apply tape as shown in the illustration.