Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW MASTER SWITCH
RM2090E _59 Vehicle Exterior _060707 WINDOW / GLASS _0297759 POWER WINDOW MASTER SWITCH G

WINDOW / GLASS  POWER WINDOW MASTER SWITCH  INSPECTION  


PROCEDURE

Hide 84820 1.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

a.
B312538E03
1.698,1.333 2.031,1.833 true 1.323,0.896 1.635,0.448 true 0.135,0.063 0.323,0.219 0.188,0.156 10 false *a 2.073,1.781 2.271,1.938 0.198,0.156 10 false +B 1.688,0.313 2.042,0.469 0.354,0.156 10 false GND

Check that the LED illuminates.

i.

Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 12 (+B)
Battery negative (-) → 5 (GND)
LED illuminates


Text in Illustration
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)

If the result is not as specified, replace the power window regulator master switch assembly.