Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM
RM2090E _59 Vehicle Exterior _060707 WINDOW / GLASS _0297766 POWER WINDOW CONTROL SYSTEM U

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM  FAIL-SAFE CHART  


POWER WINDOW OPERATION IN FAIL-SAFE MODE


HINT:

If the pulse sensor built into the power window regulator motor malfunctions, the power window control system enters fail-safe mode.


a.

The power window control system prohibits the following power window operations when the pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal.

Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Ignition switch ON Ignition switch off
(Key-off operation permitted)
Ignition switch off
(Key-off operation prohibited)
Manual up (Driver side door window) X X -
Manual down (Driver side door window) ○ X -
Auto up (Driver side door window)
(hold switch at auto up position)
○* X -
Auto up (Driver side door window) X X -
Auto down (Driver side door window) X X -
Manual up (Remote switch operation) X X -
Manual down (Remote switch operation) X X -
Auto up (Remote switch operation)
(hold switch at auto up position)
X X -
Auto up (Remote switch operation) X X -
Auto down (Remote switch operation) X X -

Power Window Regulator Switch Assembly
Power Window Operation Condition
Ignition switch ON Ignition switch off
(Key-off operation permitted)
Ignition switch off
(Key-off operation prohibited)
Manual up (Front passenger side door window) X X -
Manual down (Front passenger side door window) ○ X -
Auto up (Front passenger side door window)
(hold switch at auto up position)
○* X -
Auto up (Front passenger side door window) X X -
Auto down (Front passenger side door window) X X -

HINT:
·

○: Operates

·

X: Operation prohibited

·

*: Operates in pull up the power window switch to the auto up position without jam protection



i.

Power window switch LED control

HINT:

During normal operation (fail-safe is not operating) the LED illuminate as shown in the illustration.

1.

For Driver Side:

U126584E01
0.681,1.634 1.337,1.954 0.656,0.320 10 Key-off operation: 1.753,2.164 2.441,2.306 0.687,0.142 10 Prohibition 1.726,1.675 2.440,1.815 0.714,0.141 10 Permission 0.668,3.578 1.528,3.901 0.860,0.323 10 Window lock switch signal: 2.231,3.981 2.445,4.118 0.214,0.137 10 Off 2.231,3.548 2.445,3.730 0.214,0.181 10 On 0.668,2.677 1.037,2.815 0.369,0.137 10 LED: 1.87,3.159 2.442,3.310 0.571,0.151 10 Turns off 1.874,2.67 2.442,2.819 0.568,0.149 10 Turns on 0.66,0.648 1.606,0.797 0.945,0.149 10 Ignition switch: 2.231,1.178 2.445,1.316 0.214,0.138 10 Off 2.236,0.689 2.467,0.844 0.232,0.155 10 ON 4.183,0.833 5.053,0.833 false 5.368,0.109 6.769,0.253 1.401,0.144 10 Approximately 45 sec. 0.223,0.118 1.639,0.279 1.416,0.161 10 Normal output pattern: 4.574,0.833 5.138,0.202 5.138,0.202 5.303,0.202 false

2.

For Front Passenger Side:

U146861E02
4.229,0.802 5.021,0.802 false 4.448,0.792 4.99,0.25 4.99,0.25 5.156,0.25 false 0.313,0.698 1.396,1.083 1.083,0.385 10 false Ignition switch: 0.604,1.771 1.375,2.427 0.771,0.656 10 false Key-off operation: 0.917,2.854 1.385,3.24 0.469,0.385 10 false LED: 0.396,3.656 1.469,4.427 1.073,0.771 10 false Window lock switch signal: 2.146,0.698 2.51,1.063 0.365,0.365 10 false ON 5.219,0.156 6.635,0.521 1.417,0.365 10 false Approximately 45 sec. 2.146,1.188 2.51,1.552 0.365,0.365 10 false Off 2.146,3.563 2.51,3.927 0.365,0.365 10 false ON 2.146,3.938 2.51,4.302 0.365,0.365 10 false Off 1.667,1.667 2.5,2.031 0.833,0.365 10 false Permission 1.667,2.125 2.5,2.49 0.833,0.365 10 false Prohibition 1.771,2.667 2.51,3.031 0.74,0.365 10 false Turns on 1.76,3.115 2.5,3.479 0.74,0.365 10 false Turns off 0.167,0.115 1.781,0.635 1.615,0.521 10 false Normal output pattern:




ii.

Fail-safe deactivation condition

When the pulse sensor is normal, to deactivate fail-safe mode, pull up the power window switch to the auto up position and hold it for at least 1 second to fully close the window from the fully open position. As a result, the auto up/down function will return.




b.

Initialization failure

HINT:

During initialization of the power window regulator motor ECU, when the window position or initialization complete status cannot be properly read from the EEPROM, the power window control system prohibits the operations as follows:


Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Ignition switch ON Ignition switch off
(Key-off operation permitted)
Ignition switch off
(Key-off operation prohibited)
Manual up (Driver side door window) X X -
Manual down (Driver side door window) ○ X -
Auto up (Driver side door window)
(hold switch at auto up position)
○* X -
Auto up (Driver side door window) X X -
Auto down (Driver side door window) X X -
Manual up (Remote switch operation) X X -
Manual down (Remote switch operation) X X -
Auto up (Remote switch operation)
(hold switch at auto up position)
X X -
Auto up (Remote switch operation) X X -
Auto down (Remote switch operation) X X -

Power Window Regulator Switch Assembly
Power Window Operation Condition
Ignition switch ON Ignition switch off
(Key-off operation permitted)
Ignition switch off
(Key-off operation prohibited)
Manual up (Front passenger side door window) X X -
Manual down (Front passenger side door window) ○ X -
Auto up (Front passenger side door window)
(hold switch at auto up position)
○* X -
Auto up (Front passenger side door window) X X -
Auto down (Front passenger side door window) X X -

HINT:
·

○: Operates

·

X: Operation prohibited

·

*: Operates in pull up the power window switch to the auto up position without jam protection



i.

Power window switch LED control

HINT:

During initialization of the power window regulator motor ECU, when the window position or initialization complete status cannot be properly read from the EEPROM during fail-safe mode, the LED illuminates as shown in the illustration.

1.

For Driver Side:

B322616E03
0.104,0.24 2.188,0.448 2.083,0.208 10 false Initialization failure output pattern: 0.219,0.896 1.177,1.104 0.958,0.208 10 false Ignition switch: 2.167,4.125 2.427,4.313 0.26,0.188 10 false Off 2.167,3.688 2.438,3.948 0.271,0.26 10 false On 2.021,1.344 2.385,1.615 0.365,0.271 10 false Off 2.01,0.844 2.573,1.208 0.563,0.365 10 false ON 1.844,2.292 2.479,2.458 0.635,0.167 10 false Turns off 1.844,1.823 2.406,2.042 0.563,0.219 10 false Turns on 0.375,1.833 0.875,2.219 0.5,0.385 10 false LED: 0.333,3.667 1.229,4.01 0.896,0.344 10 false Window lock switch signal: 2.469,2.979 2.99,3.177 0.521,0.198 10 false 1.4 sec. 2.479,2.604 3.021,2.813 0.542,0.208 10 false 0.7 sec.

2.

For Front Passenger Side:

B322616E03
0.104,0.24 2.188,0.448 2.083,0.208 10 false Initialization failure output pattern: 0.219,0.896 1.177,1.104 0.958,0.208 10 false Ignition switch: 2.167,4.125 2.427,4.313 0.26,0.188 10 false Off 2.167,3.688 2.438,3.948 0.271,0.26 10 false On 2.021,1.344 2.385,1.615 0.365,0.271 10 false Off 2.01,0.844 2.573,1.208 0.563,0.365 10 false ON 1.844,2.292 2.479,2.458 0.635,0.167 10 false Turns off 1.844,1.823 2.406,2.042 0.563,0.219 10 false Turns on 0.375,1.833 0.875,2.219 0.5,0.385 10 false LED: 0.333,3.667 1.229,4.01 0.896,0.344 10 false Window lock switch signal: 2.469,2.979 2.99,3.177 0.521,0.198 10 false 1.4 sec. 2.479,2.604 3.021,2.813 0.542,0.208 10 false 0.7 sec.





c.

LIN communication failure

HINT:

If the LIN communication line malfunctions (communication stop), the power window control system prohibits the operations as follows:


Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Ignition switch ON
Manual up ○*
Manual down ○
Auto up (hold switch at auto up position) ○*
Auto up ○*
Auto down ○

Power Window Regulator Switch Assembly
Power Window Operation Condition
Ignition switch ON
Manual up ○*
Manual down ○
Auto up (hold switch at auto up position) ○*
Auto up ○*
Auto down ○

HINT:
·

○: Operates

·

X: Operation prohibited

·

*: Jam protection can operate.

·

Remote up/down function does not operate.




d.

LIN communication failure and pulse sensor failure

HINT:

If the LIN communication line malfunctions (communication stop) and the pulse sensor for the jam protection function has problems, the power window control system prohibits the operations as follows:


Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Always
Manual up X
Manual down X
Auto up (hold switch at auto up position) X
Auto up X
Auto down X

Power Window Regulator Switch Assembly
Power Window Operation Condition
Always
Manual up X
Manual down X
Auto up (hold switch at auto up position) X
Auto up X
Auto down X

HINT:
·

○: Operates

·

X: Operation prohibited

·

Driver door window: When the jam protection function does not operate due to a LIN communication failure, the manual up and auto up functions will not operate.

·

Remote switch operation: Not operative during a LIN communication failure




e.

LIN communication failure and abnormal window position learned value or initialization failure

HINT:

If the LIN communication line malfunctions (communication stop) and the window position or the learned value is abnormal, the power window control system prohibits the operations as follows:


Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Always
Manual up X
Manual down ○
Auto up (hold switch at auto up position) ○*
Auto up X
Auto down X

HINT:
·

○: Operates

·

X: Operation prohibited

·

*: Operates in pull up the power window switch to the auto up position without jam protection

·

Remote switch operation: Operation is not possible during a LIN communication failure.