Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER SYSTEM
RM2090E _59 Vehicle Exterior _060707 WINDOW / GLASS _0297767 WINDOW DEFOGGER SYSTEM U

WINDOW / GLASS  WINDOW DEFOGGER SYSTEM  TERMINALS OF ECU  


CHECK MAIN BODY ECU (NETWORK GATEWAY ECU)


U146880E02
0.313,0.292 0.531,0.5 0.219,0.208 10 false *1 1.677,6.667 1.906,6.875 0.229,0.208 10 false *2 0.49,1.229 0.896,1.469 0.406,0.24 10 false 3D 0.49,1.875 0.896,2.115 0.406,0.24 10 false 3C 0.49,2.396 0.896,2.635 0.406,0.24 10 false 3E 3.729,1.052 4.135,1.292 0.406,0.24 10 false MB 3.479,3.198 3.885,3.438 0.406,0.24 10 false MB 6.333,1.229 6.74,1.469 0.406,0.24 10 false 3B 6.333,1.865 6.74,2.104 0.406,0.24 10 false 3A 1.469,4.073 1.875,4.313 0.406,0.24 10 false 3D 4.177,4.073 4.583,4.313 0.406,0.24 10 false 3C 4.906,5.281 5.313,5.521 0.406,0.24 10 false 3A 3.052,6.552 3.458,6.792 0.406,0.24 10 false A73 3.677,6.552 4.01,6.792 0.333,0.24 10 false D5 4.26,6.552 4.594,6.792 0.333,0.24 10 false D6 1.802,5.281 2.208,5.521 0.406,0.24 10 false 3B 6.25,4.073 6.656,4.313 0.406,0.24 10 false 3E 1.177,7.521 1.583,7.76 0.406,0.24 10 false A73 3.563,7.521 3.896,7.76 0.333,0.24 10 false D5 5.875,7.521 6.208,7.76 0.333,0.24 10 false D6

Text in Illustration
*1 Instrument Panel Junction Block Assembly *2 Main Body ECU (Network Gateway ECU)

a.

Remove the main body ECU (network gateway ECU).


b.

Disconnect the A73 main body ECU (network gateway ECU) connector.


c.

Measure the voltage and resistance of the wire harness side connector.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A73-24 - Body ground W - Body ground Ignition power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V

If the result is not as specified, there may be a malfunction on the wire harness side.




CHECK HEATER CONTROL SUB-ASSEMBLY (for Manual Air Conditioning System)


U146884E02
1.573,0.219 2,0.479 0.427,0.26 10 false D22

a.

Disconnect the D22 heater control sub-assembly connector.


b.

Measure the voltage and resistance of the wire harness side connector.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
D22-2 (RDEF+) - D22-4 (RDEF-) W - B-Y Ignition power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
D22-4 (RDEF-) - Body ground B-Y - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



c.

Reconnect the D22 heater control sub-assembly connector.


d.

Measure the voltage of the connector.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
D22-6 (IND+) - D22-4 (RDEF-) R-V - B-Y Rear window defogger signal Ignition switch ON, rear window defogger switch OFF 11 to 14 V
Ignition switch ON, rear window defogger switch ON Below 1 V

If the result is not as specified, the heater control sub-assembly may have a malfunction.