Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR SUPPORT
RM2090E _59 Vehicle Exterior _060708 DOOR / HATCH _0297773 LUGGAGE COMPARTMENT DOOR SUPPORT A

DOOR / HATCH  LUGGAGE COMPARTMENT DOOR SUPPORT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The following procedure is for the LH side.



PROCEDURE

Hide 64530A 1.INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

In order to prevent the piston rod from deforming, do not apply any horizontal load to the door support.



a.

When reusing the luggage compartment door support assembly:

i.
B233502

Install the 2 stop rings to the luggage compartment door support assembly.



b.
B310909

Install the luggage compartment door support assembly.

NOTICE:
·

Install the luggage compartment door support assembly while supporting the luggage compartment door by hand.

·

Check that the luggage compartment door support assembly is engaged in the ball joint and that the luggage compartment door support assembly cannot be pulled out.