Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR SUPPORT
RM2090E _59 Vehicle Exterior _060708 DOOR / HATCH _0297773 LUGGAGE COMPARTMENT DOOR SUPPORT A

DOOR / HATCH  LUGGAGE COMPARTMENT DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The following procedure is for the LH side.



PROCEDURE

Hide 64530A 1.REMOVE LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

In order to prevent the piston rod from deforming, do not apply any horizontal load to the door support.



a.
B310908E01
2.296,0.85 2.451,1.010 0.156,0.161 10 *1 3.029,1.027 3.185,1.188 0.156,0.161 10 *2 2.758,1.06 2.503,0.944 false 2.86,1.338 3.052,1.242 false

Using a screwdriver, remove the 2 stop rings along the groove.

Text in Illustration
*1 Protective Tape
*2 Stop Ring

HINT:

Tape the screwdriver tip before use.



b.

Release the ball joint and remove the luggage compartment door support.

NOTICE:

Remove the luggage compartment door support while supporting the luggage compartment door by hand.