Use the same procedure for both the RH and LH sides.
The following procedure is for the LH side.
87961
1.REMOVE OUTER MIRROR LH
87945
2.REMOVE OUTER MIRROR COVER LH
Apply protective tape as shown in the illustration.
| *1 | Protective Tape |
Using a screwdriver, disengage the 4 claws.
Insert a moulding remover, and then disengage the 2 claws while sliding the moulding remover slowly in the direction of the arrow to remove the outer mirror cover LH.
| *1 | Protective Tape |
| *2 | Moulding Remover |