Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER RUBBER
RM2090E _59 Vehicle Exterior _060710 WIPER / WASHER _0297786 FRONT WIPER RUBBER A

WIPER / WASHER  FRONT WIPER RUBBER  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 85222A 1.REMOVE FRONT WIPER BLADE

a.
E196527E01
2.421,0.68 2.600,0.857 0.179,0.177 10 *1 2.394,0.786 2.204,0.891 false

Remove the holder of the front wiper blade.


b.

Remove the front wiper blade from the front wiper arm as shown in the illustration.

Text in Illustration
*1 Holder

NOTICE:

Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield surface.



Hide 85214B 2.REMOVE WIPER RUBBER

a.
E190094

Remove the wiper rubber with the wiper rubber backing plates from the front wiper blade.


b.
E196562

Remove the 2 wiper rubber backing plates from the wiper rubber.


Hide 85214B 3.INSTALL WIPER RUBBER

a.
E196529

Install the 2 wiper rubber backing plates to the wiper rubber.

NOTICE:
·

Align the protrusions on the wiper rubber and the notches of the backing plates.

·

Align the curves of the backing plates and the glass.




b.
E190095

Install the wiper rubber to the front wiper blade as shown in the illustration.

NOTICE:

Push the wiper rubber into the wiper blade strongly to engage them securely.



Hide 85222A 4.INSTALL FRONT WIPER BLADE

a.
E196528E01
2.335,0.588 2.588,0.813 0.253,0.225 10 *1 2.301,0.686 2.145,0.842 false

Install the front wiper blade as shown in the illustration.


b.

Install the holder of the front wiper blade.

Text in Illustration
*1 Holder