Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR
RM2090E _59 Vehicle Exterior _060710 WIPER / WASHER _0297788 WASHER MOTOR G

WIPER / WASHER  WASHER MOTOR  INSPECTION  


PROCEDURE

Hide 85310 1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.

Disconnect the front washer motor and pump assembly connector.

HINT:

Make sure that the front washer motor and pump assembly is installed to the washer jar.



b.

Fill the washer jar with windshield washer fluid.


c.
E132855E06
0.238,0.168 0.412,0.314 0.174,0.147 10 *a

Check that the windshield washer fluid flows from the washer jar.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Windshield washer fluid flows from the washer jar


Text in Illustration
*a Component without harness connected
(Windshield Washer Motor and Pump Assembly)

If the result is not as specified, replace the windshield washer motor and pump assembly.