1.REMOVE FRONT WHEEL LH
53876A
2.REMOVE FRONT FENDER LINER LH
Remove the bolt.
Remove the grommet.
The grommet need to be replaced with new ones because they will break when they are removed.
Using a clip remover, disengage the 18 clips and remove the front fender liner LH.
3.DRAIN WINDSHIELD WASHER FLUID
Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the windshield washer fluid.
Use a container to collect the windshield washer fluid.
85310
4.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
Disconnect the connector.
Remove the windshield washer motor and pump assembly.