Use the same procedure for both the RH and LH sides.
85035
1.ADJUST WASHER NOZZLE SUB-ASSEMBLY
Using a 2 thin-bladed screwdrivers with its tip wrapped in protective tape, adjust the direction of the washer nozzle sub-assembly.
| *1 | Protective Tape | - | - |
Use the upper and lower adjustment grooves of the nozzle to adjust the washer nozzle.
Do not insert the screwdriver into the washer fluid spraying nozzle. Doing so may damage the washer fluid spraying nozzle, resulting in spraying problems.