Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
85208A
1.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY
Install the headlight washer actuator sub-assembly with the bolt.
Install the clip.
Connect the headlight washer hose.
52119A
2.INSTALL FRONT BUMPER COVER
3.ADD WASHER FLUID
4. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light)
5. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light)
6.INSPECT FOG LIGHT AIMING (w/ Fog Light)
7.ADJUST FOG LIGHT AIMING (w/ Fog Light)