Use the same procedure for RH and LH sides.
The procedure listed below is for LH side.
81110B
1.REMOVE NO. 1 HEADLIGHT BULB
Disconnect the connector.
Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.
Do not touch the bulb glass.
81110D
2.REMOVE NO. 2 HEADLIGHT BULB
Disconnect the connector.
Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.
Do not touch the bulb glass.
81610F
3.REMOVE CLEARANCE LIGHT BULB (w/o Side Marker Light)
Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
Remove the clearance light bulb from the headlight cord.
81125
4.REMOVE HEADLIGHT CORD
Disengage the claw to remove the headlight cord.