Use the same procedure for RH and LH sides.
The procedure listed below is for LH side.
81150
1.INSTALL HEADLIGHT ASSEMBLY
Engage the claw.
Install the headlight assembly with the bolt.
Install the clip.
Connect each connector.
52116A
2.INSTALL FRONT BUMPER SIDE SUPPORT LH
Install the front bumper side support LH with the 3 bolts B.
Install the bolts A.
Engage the 2 clamps to connect the wire harness.
52119A
3.INSTALL FRONT BUMPER COVER
4. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT
5. PREPARE FOR HEADLIGHT AIMING
6.INSPECT HEADLIGHT AIMING
7.ADJUST HEADLIGHT AIMING