Home › Vehicle Exterior › LIGHTING (EXT) › HIGH INTENSITY DISCHARGE HEADLIGHT BULB
RM2090E _59 Vehicle Exterior _060711 LIGHTING (EXT) _0297797 HIGH INTENSITY DISCHARGE HEADLIGHT BULB A

LIGHTING (EXT)  HIGH INTENSITY DISCHARGE HEADLIGHT BULB  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81110L 1.INSTALL DISCHARGE HEADLIGHT BULB

a.

Install the discharge headlight bulb.

NOTICE:

Do not touch the bulb glass.



b.
B312207E02
1.167,1.198 1.292,1.375 0.125,0.177 10 true 1 1.979,0.542 2.104,0.719 0.125,0.177 10 true 2 1.073,0.552 1.198,0.729 0.125,0.177 10 true 2

Lock the set spring as indicated by the arrow in the order shown in the illustration.


c.
B312202

Turn the headlight light control ECU sub-assembly socket in the direction indicated by the arrow in the illustration to connect the headlight light control ECU sub-assembly socket.


Hide 81189 2.INSTALL HEADLIGHT COVER

a.
B312203

Turn the headlight cover in the direction indicated by the arrow in the illustration to install it.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)