Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM2090E _59 Vehicle Exterior _060711 LIGHTING (EXT) _0297805 LICENSE PLATE LIGHT ASSEMBLY G

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81270 1.INSPECT LICENSE PLATE LIGHT ASSEMBLY

a.
B312243E02
1.813,0.979 2.406,0.698 true 1.021,1.563 1.615,1.292 true 0.177,0.115 0.365,0.323 0.188,0.208 10 false *a 2.469,0.604 2.667,0.771 0.198,0.167 10 false B 0.865,1.531 1.063,1.698 0.198,0.167 10 false E

Apply battery voltage to the connector and check the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → 1 (B)
Battery negative (-) → 2 (E)
License plate light comes on.


Text in Illustration
*a Component without harness connected
(License Plate Light Assembly)

If the result is not specified, replace the license plate light bulb or the license plate light assembly.