Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT LEVELING SWITCH
RM2090E _59 Vehicle Exterior _060711 LIGHTING (EXT) _0297809 HEADLIGHT LEVELING SWITCH G

LIGHTING (EXT)  HEADLIGHT LEVELING SWITCH  INSPECTION  


PROCEDURE

Hide 84152 1.INSPECT HEADLIGHT LEVELING SWITCH

E248006E02
1.229,1.406 1.771,1.906 true 1.125,1.354 1.177,0.51 true 1.01,1.354 0.75,0.5 true 1.99,0.531 1.365,1.333 true 0.135,0.063 0.365,0.313 0.229,0.25 10 false *a 1.896,0.302 2.281,0.479 0.385,0.177 10 false 5 (E) 1.063,0.292 1.396,0.469 0.333,0.177 10 false 7 (T) 0.552,0.281 0.885,0.458 0.333,0.177 10 false 8 (B) 1.698,1.938 2.031,2.115 0.333,0.177 10 false 6 (T)

a.

Check the ratio.

Text in Illustration
*a Component with harness connected
(Headlight Leveling Switch)

i.

Connect the positive (+) battery lead to terminal 8 (B) and the negative (-) battery lead to terminal 5 (E).


ii.

Check the ratio which is obtained by dividing the voltage between terminals 7 (T) and 5 (E) by the voltage between 6 (T) and 5 (E). The voltages must be measured using a voltmeter.

Standard Ratio:
Switch Condition Specified Condition
0 0.84 to 0.89
1 0.67 to 0.73
2 0.51 to 0.57
3 0.36 to 0.41
4 0.21 to 0.26
5 0.07 to 0.10


If the result is not as specified, replace the headlight leveling switch.



b.
E248002E02
0.198,0.135 0.458,0.406 0.26,0.271 10 false *a

Check the operation of the headlight leveling switch illuminates.

i.

Apply battery voltage to the headlight leveling switch illuminates terminals.

OK:
Condition Specified Condition
Battery positive (+) → 3
Battery negative (-) → 2
Illuminates


Text in Illustration
*a Component without harness connected
(Headlight Leveling Switch)

If the result is not as specified, replace the headlight leveling switch.