Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH
RM2090E _59 Vehicle Exterior _060711 LIGHTING (EXT) _0297810 STOP LIGHT SWITCH G

LIGHTING (EXT)  STOP LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.
E249696E01
0.167,0 0.469,0.258 0.301,0.258 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pushed 10 kΩ or higher
Not pushed Below 1 Ω


Text in Illustration
*a Component without harness connected
(Stop Light Switch Assembly)

If the result is not as specified, replace the stop light switch assembly.