Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM2090E _59 Vehicle Exterior _060713 EXTERIOR PANELS / TRIM _0297826 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75555D 1.REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING

a.
B313068

Disengage the 2 clips and remove the center roof drip side finish moulding.

NOTICE:
·

Do not remove the clips.

·

If the clips are damaged or dropped off, replace them with new clips.