Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT FENDER GARNISH › from 2016.06
RM2090E _59 Vehicle Exterior _060713 EXTERIOR PANELS / TRIM _0297828 FRONT FENDER GARNISH A

EXTERIOR PANELS / TRIM  FRONT FENDER GARNISH  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75602A 1.REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH

a.
B453763E01
2.333,1.729 2,1.729 2,1.729 2,1.396 true 2.385,1.646 2.875,2.063 0.49,0.417 10 false *1

Apply protective tape to the front fender panel in the area around the front fender moulding sub-assembly.

Text in Illustration
*1 Protective Tape


b.

Using an infrared light, heat the front fender panel and the front fender moulding sub-assembly.

Heating Temperature:
Item Temperature
Front Fender Panel 40 to 60°C (104 to 140°F)
Front Fender Moulding Sub-assembly 20 to 30°C (68 to 86°F)


CAUTION:

Do not burn yourself with the hot front fender panel and front fender moulding sub-assembly or with the infrared light.


NOTICE:

Do not heat the front fender panel and front fender moulding sub-assembly excessively.



c.
B453764E01
1.552,0.635 1.552,0.302 1.552,0.302 1.135,0.302 true 2.375,1.677 2.375,1.344 true 0.958,0.229 1.365,0.531 0.406,0.302 10 false *1 2.333,1.708 2.74,2.01 0.406,0.302 10 false *2

Insert piano wire between the front fender panel and the front fender moulding sub-assembly.

Text in Illustration
*1 Piano Wire
*2 Wooden Block
V100145

No. 1 Moulding Tape


d.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


e.

Pull the piano wire and scrape off the double-sided tape that holds the front fender moulding sub-assembly to the front fender panel.

NOTICE:

Be careful not to damage the front fender panel.



f.
B453765

Using a moulding remover, disengage the 6 clips and remove the front fender moulding sub-assembly.

NOTICE:
·

If reusing the garnish, take care not to damage the front fender moulding sub-assembly.

·

Be careful not to damage the vehicle body.