52159
1.INSTALL REAR BUMPER COVER
Insert the rear light harness to the luggage compartment room.
Engage the 3 guides.
Engage the 5 claws.
Use the same procedure for the RH and LH sides.
Install the 2 screws.
Install the rear bumper cover with the 8 clips.
Connect the connector.
Engage the clamp to install the rear light assembly harness.
64722
2.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH
64429F
3.INSTALL LUGGAGE COMPARTMENT TRIM BOX
58387
4.INSTALL REAR FLOOR FINISH PLATE
64711
5.INSTALL LUGGAGE COMPARTMENT FLOOR MAT