Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2012.03–2016.06
RM2090E _59 Vehicle Exterior _060713 EXTERIOR PANELS / TRIM _0297830 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REMOVAL  


PROCEDURE

Hide 64711 1.REMOVE LUGGAGE COMPARTMENT FLOOR MAT

Hide 64429F 3.REMOVE LUGGAGE COMPARTMENT TRIM BOX

Hide 64722 4.REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH

Hide 52159 5.REMOVE REAR BUMPER COVER

a.
B313034

Disconnect the rear light assembly connector.


b.

Disengage the clamp and disconnect the wire harness.


c.
B313035

Disengage the grommet and pull out the wire harness.


d.
B313036

Remove the 2 screws.


e.
B313037E01
1.934,0.375 2.108,0.536 0.174,0.161 10 *1 1.564,0.865 2.017,0.556 2.017,0.556 2.813,0.819 false

Put protective tape around the rear bumper cover.

Text in Illustration
*1 Protective Tape


f.
B313038

Using a clip remover, remove the 6 clips.


g.
B313039

Remove the clip.

HINT:

Use the same procedure for the RH and LH sides.



h.
B313040

Disengage the 5 claws as shown in the illustration.

HINT:

Use the same procedure for the RH and LH sides.



i.
B313041

Disengage the 3 guides and remove the rear bumper cover.