Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2012.03–2016.06
RM2090E _59 Vehicle Exterior _060713 EXTERIOR PANELS / TRIM _0297830 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REASSEMBLY  


PROCEDURE

Hide 52127C 1.INSTALL REAR BUMPER HOLE COVER

a.
B322389

Engage the 4 claws to install the rear bumper hole cover.


Hide 52169B 2.INSTALL CENTER REAR BUMPER BRACKET

a.
B313047

Install the center rear bumper bracket with the clip.

HINT:

Use the same procedure for the RH and LH sides.



Hide 3.INSTALL REAR BUMPER REINFORCEMENT

a.
B313046

Install the rear bumper reinforcement with the 4 bolts and the 2 nuts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 4.INSTALL REAR BUMPER REINFORCEMENT (w/ Side Marker Light)

a.
B312979

Install the rear bumper reinforcement with the 4 bolts and the 2 nuts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 5.INSTALL REAR BUMPER PROTECTOR

a.
B322391

Install the rear bumper protector as shown in the illustration.


Hide 52186A 6.INSTALL REAR BUMPER SIDE BRACKET LH

a.
B313045

Install the rear bumper side bracket LH with the 3 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 52185A 7.INSTALL REAR BUMPER SIDE BRACKET RH

HINT:

Use the same procedure for the RH and LH sides.


Hide 52536A 8.INSTALL REAR BUMPER SIDE RETAINER LH

a.
B313044

Install the rear bumper side retainer LH with the 2 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 52575 9.INSTALL REAR BUMPER SIDE RETAINER RH

HINT:

Use the same procedure for the RH and LH sides.


Hide 52592 10.INSTALL REAR BUMPER SIDE SEAL LH

a.
B313043

Install the rear bumper side seal LH with the 4 clips.


Hide 52591 11.INSTALL REAR BUMPER SIDE SEAL RH

HINT:

Use the same procedure for the RH and LH sides.


Hide 52172B 12.INSTALL NO. 2 REAR BUMPER REINFORCEMENT

a.
B313042

Install the No. 2 rear bumper reinforcement with the 2 clips.


Hide 52171A 13.INSTALL NO. 1 REAR BUMPER REINFORCEMENT

HINT:

Use the same procedure as for the No. 2 rear bumper reinforcement.


Hide 14.INSTALL REAR CENTER UNDER SPOILER (for Sport Package)

a.
B312966

Engage the hook to install the rear center under spoiler.


b.

Install the 2 clips.


c.
B312967

Install the 4 clips.


Hide 15.INSTALL REAR UNDER SPOILER BRACKET (for Sport Package)

a.
B312964

Install the 2 rear under spoiler brackets with the 4 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 16.INSTALL REAR UNDER SPOILER COVER (for Sport Package)

a.
B312996

Engage the 2 guides to install the rear under spoiler cover.


b.

Engage the 2 claws.

HINT:

Use the same procedure as for the RH side.



Hide 17.INSTALL REAR SIDE UNDER INNER SPOILER LH (for Sport Package)

a.
B312987

Slide the rear side under inner spoiler LH as shown in the illustration to install it.


b.

Engage the guide.


c.
B312962

Install the 3 clips.


d.

Install the 3 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 18.INSTALL REAR SIDE UNDER INNER SPOILER RH (for Sport Package)

HINT:

Use the same procedure for the RH and LH sides.


Hide 19.INSTALL REAR SIDE UNDER OUTER SPOILER LH (for Sport Package)

a.

Clean the rear bumper cover surface.

i.

Using a heat light, heat the rear bumper cover surface.


ii.

Remove the double-sided tape from the rear bumper cover.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install the rear side under outer spoiler LH.

i.

Using a heat light, heat the rear bumper cover and the rear side under outer spoiler LH.


ii.

Remove the peeling paper from the front spoiler cover LH.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.
B312970

Engage the claw and install the rear side under outer spoiler LH.


iv.
B443975

Apply thorough pressure to the sections with double-sided tape.

Text in Illustration
V100144

Double-sided Tape


v.

Install the 5 clips.



Hide 20.INSTALL REAR SIDE UNDER OUTER SPOILER RH (for Sport Package)

HINT:

Use the same procedure for the RH and LH sides.