52164A
1.INSTALL REAR BUMPER PLATE LH
Engage the 2 guides and 4 claws to install the rear bumper plate LH.
52163A
2.INSTALL REAR BUMPER PLATE RH
Use the same procedure for the RH and LH sides.
52169B
3.INSTALL CENTER REAR BUMPER BRACKET
Install the center rear bumper bracket with the clip.
Use the same procedure for the RH and LH sides.
4.INSTALL REAR BUMPER REINFORCEMENT
Install the rear bumper reinforcement with the 4 bolts and the 2 nuts.
52186A
5.INSTALL REAR BUMPER SIDE BRACKET LH
Install the rear bumper side bracket LH with the 3 screws.
52185A
6.INSTALL REAR BUMPER SIDE BRACKET RH
Use the same procedure for the RH and LH sides.
52536A
7.INSTALL REAR BUMPER SIDE RETAINER LH
Install the rear bumper side retainer LH with the 2 screws.
52575
8.INSTALL REAR BUMPER SIDE RETAINER RH
Use the same procedure for the RH and LH sides.
52592
9.INSTALL REAR BUMPER SIDE SEAL LH
Install the rear bumper side seal LH with the 4 clips.
52591
10.INSTALL REAR BUMPER SIDE SEAL RH
Use the same procedure for the RH and LH sides.
11.INSTALL REAR LIGHT ASSEMBLY