Home › Brake › BRAKE (FRONT) › FRONT BRAKE(for Opposed Type Caliper) › from 2017.03
RM2090E _54 Brake _060686 BRAKE (FRONT) _0313978 FRONT BRAKE(for Opposed Type Caliper) A

BRAKE (FRONT)  FRONT BRAKE(for Opposed Type Caliper)  REASSEMBLY  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 47547B 1.TEMPORARILY INSTALL FRONT DISC BRAKE BLEEDER PLUG

a.

Temporarily install the 2 front disc brake bleeder plugs to the front disc brake cylinder assembly.


Hide 31478B 2.INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

a.

Install the 2 front disc brake bleeder plug caps on the front disc brake bleeder plugs.


Hide 3.INSTALL PISTON SEAL

a.
C364380C02
0,0 0,0 false
V100144

Lithium Soap Base Glycol Grease


Apply a light layer of lithium soap base glycol grease to the entire circumference of 4 new piston seals.


b.

Securely install the 4 piston seals into the grooves of the front disc brake cylinder assembly.

NOTICE:

Securely install the piston seal into the groove of the front disc brake cylinder assembly.



Hide 47731 4.INSTALL FRONT DISC BRAKE PISTON

a.

Apply a light layer of lithium soap base glycol grease to the entire circumference of 4 new cylinder boots as shown in the illustration.

C364381C04
0.458,1.042 0.76,1.042 true 0.833,0.24 1.271,0.24 1.271,0.24 2.052,1.469 true 2.219,1.5 2.521,2.083 2.521,2.083 2.865,2.083 true 4.469,0.844 4.583,0.615 4.583,0.615 4.771,0.615 false 5.031,0.615 5.313,0.615 5.313,0.615 5.427,1.031 false 4.406,1.76 4.833,1.76 false 5.135,1.76 5.354,1.76 5.354,1.76 5.583,1.5 true 5.063,2.125 5.281,2.125 5.281,2.125 5.51,1.865 true 0.635,0.167 0.948,0.323 0.313,0.156 10 false *1 2.927,2.021 3.24,2.177 0.313,0.156 10 false *2 0.292,0.958 0.604,1.115 0.313,0.156 10 false *3 4.844,0.542 5.156,0.698 0.313,0.156 10 false *1 4.906,1.688 5.219,1.844 0.313,0.156 10 false *2 4.875,2.042 5.188,2.198 0.313,0.156 10 false *3
*1 Cylinder Boot *2 Front Disc Brake Piston
*3 Front Disc Brake Cylinder Assembly
V100144

Lithium Soap Base Glycol Grease



b.

Securely install the 4 cylinder boots into the grooves of the 4 front disc brake pistons.


c.

Apply a light layer of lithium soap base glycol grease to the entire circumference of the 4 front disc brake pistons and install them to the front disc brake cylinder assembly.

NOTICE:

Do not install the piston forcibly in the disc brake cylinder.