CHECK ECM
Measure the resistance, voltage and waveform according to the value(s) in the table below.
| Terminal No.
(Symbol) |
Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A33-2(BATT) - A34-1(E03) | W - B-R | Battery power | Always | 11 to 14 V |
| A33-21(LIN) - Body ground | R - Body ground | LIN communication line | Ignition switch off
(while LIN communication is stopped) |
10 kΩ or higher |
| A34-1(E03) - Body ground | B-R - Body ground | Body ground | Always | Below 1 Ω |
If the result is not as specified, the ECU may have a malfunction.