Home › Power Source / Network › FA20 (BATTERY / CHARGING) › GENERATOR (for 150 A Type) › from 2019.03
RM2090E _57 Power Source / Network _060693 FA20 BATTERY / CHARGING _0396239 GENERATOR(for 150 A Type) A

FA20 BATTERY / CHARGING  GENERATOR(for 150 A Type)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL IC REGULATOR

a.
A391611E01
1.885,0.792 2.042,0.99 0.156,0.198 10 true A 0.719,0.385 0.979,0.635 0.26,0.25 10 false B 2.333,0.104 2.594,0.354 0.26,0.25 10 false B

Install the IC Regulator with the 3 bolts.

Torque:
Bolt A : 2.0 N*m (20 kgf*cm, 18 in.*lbf)
Bolt B : 3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 2.INSTALL BRUSH ASSEMBLY

a.

Install the brush assembly with the 2 bolts.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 3.INSTALL REAR COVER

a.

Install the rear cover.


Hide 4.INSTALL TERMINAL B

a.

Install the terminal B with the nut.

Torque:
8.9 N*m (91 kgf*cm, 79 in.*lbf)


b.

Install the cover.