87810
1.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o Rear View Monitor System)
Turn the inner rear view mirror assembly in the direction indicated by the arrow in the illustration.
Turning direction can be either right or left.
Slide the inner rear view mirror assembly forward and remove it.
2.REMOVE INNER REAR VIEW MIRROR SPRING PIN (w/o Rear View Monitor System)
| *1 | Mirror base |
Remove the inner rear view mirror spring pin from mirror base in the order shown in the illustration.
3.REMOVE MOUNT COVER ASSEMBLY (w/ Rear View Monitor System)
Disengage the 2 guides and slide the upper mount cover as shown in the illustration.
Disengage the 2 claws and 2 guides to remove the mount cover assembly as shown in the illustration.
4.REMOVE LOWER MOUNT COVER (w/ Rear View Monitor System)
Disengage the 2 claws to remove the lower mount cover as shown in the illustration.
5.REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Rear View Monitor System)
Disconnect the connector.
| *a | Approximately 25° |
Adjust the mirror angle to the lowest possible position as shown in the illustration.
| *a | 3° to 20° |
Turn the mirror 3 to 20° clockwise as shown in the illustration.
| *a | Approximately 60° |
Turn the mirror mount approximately 60° counterclockwise and disengage the 3 claws as shown in the illustration, and then remove the inner rear view mirror assembly.