Home › Power Source / Network › POWER DISTRIBUTION › BATTERY CURRENT SENSOR › from 2019.03
RM2090E _57 Power Source / Network _060694 POWER DISTRIBUTION _0297663 BATTERY CURRENT SENSOR A

POWER DISTRIBUTION  BATTERY CURRENT SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL BATTERY CURRENT SENSOR ASSEMBLY (w/ 130 A Generator)

a.

Install the battery current sensor assembly.


b.

Tighten the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


c.

Connect the engine wire with the nut.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


d.

Connect the connector.


Hide 2.INSTALL BATTERY NEGATIVE TERMINAL (w/ 150 A Generator)

a.

Install the battery negative terminal.


b.

Tighten the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


c.

Connect the engine wire with the nut.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


d.

Connect the connector.