Home › Engine / Hybrid System › K3-VE ENGINE CONTROL › CAMSHAFT POSITION SENSOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002967 K3-VE ENGINE CONTROL _0014962 CAMSHAFT POSITION SENSOR A

K3-VE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 11101E 3.REMOVE CAMSHAFT POSITION SENSOR

a.
A126602

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor.