Home › Engine / Hybrid System › K3-VE ENGINE CONTROL › ECM(for RHD) › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002967 K3-VE ENGINE CONTROL _0014972 ECM(for RHD) A

K3-VE ENGINE CONTROL  ECM(for RHD)  INSTALLATION  


PROCEDURE

Hide 89539D 1.INSTALL ECM BRACKET

a.

for Type A

i.

Engage the 2 guides and install the ECM bracket onto the ECM.


ii.

Temporarily install the ECM bracket with the 2 new steering lock set bolts.


iii.
A268952

Tighten the 2 tapered-head bolts until the bolt heads break off.



b.

for Type B

i.

Engage the 2 guides and install the ECM bracket onto the ECM.



Hide 89561 2.INSTALL ECM

a.

for Type A

i.

Install the 2 bolts.


ii.

Connect the 3 connectors.


iii.

Temporarily install the ECM bracket with the 4 new steering lock set bolts.


iv.
A268953

Tighten the 4 tapered-head bolts until the bolt heads break off.


v.

Install the bolt.



b.

for Type B

i.

Install the 2 bolts.


ii.

Connect the 3 connectors.



Hide 55642 3.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER

Hide 55501A 4.INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY