55501A
1.REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
55642
2.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER
89561
3.REMOVE ECM
for Type A
Using a centering punch, mark the center of the 4 tapered-head bolts.
Using a 3 to 4 mm (0.12 to 0.16 in.) drill, drill a hole in the 4 bolt heads.
Using a screw extractor, remove the 4 bolts and ECM bracket.
Remove the bolt.
Disconnect the 3 connectors.
Remove the 2 bolts.
for Type B
Disconnect the 3 connectors.
Remove the 2 bolts.
89539D
4.REMOVE ECM BRACKET
for Type A
Using a centering punch, mark the center of the 2 tapered-head bolts.
Using a 3 to 4 mm (0.12 to 0.16 in.) drill, drill a hole in the 2 bolt heads.
Using a screw extractor, remove the 2 bolts and ECM bracket.
Disengage the 2 guides and remove the ECM bracket from the ECM.
for Type B
Disengage the 2 guides and remove the ECM bracket from the ECM.