Home › Engine / Hybrid System › 3SZ-VE ENGINE CONTROL › CAMSHAFT POSITION SENSOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002968 3SZ-VE ENGINE CONTROL _0014977 CAMSHAFT POSITION SENSOR A

3SZ-VE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11101E 1.INSTALL CAMSHAFT POSITION SENSOR

a.
A126603C05
1.781,1.354 1.906,1.552 false 1.938,1.552 2.458,1.823 0.521,0.271 10 *1
*1 O-ring


Apply a light coat of engine oil to the O-ring.


b.

Install the camshaft position sensor with the bolt.

Torque:
7.5 N*m (77 kgf*cm, 66 in.*lbf)

NOTICE:

Do not twist the O-ring.



c.

Connect the camshaft position sensor connector and engine wire harness clamp.


Hide 4.INSPECT FOR ENGINE OIL LEAK