Home › Engine / Hybrid System › 3SZ-VE ENGINE CONTROL › IGNITION COIL AND SPARK PLUG › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002968 3SZ-VE ENGINE CONTROL _0014979 IGNITION COIL AND SPARK PLUG A

3SZ-VE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  INSTALLATION  


PROCEDURE

Hide 19100P 1.INSTALL SPARK PLUG

a.

Install the 4 spark plugs.

Torque:
22 N*m (224 kgf*cm, 16 ft.*lbf)

NOTICE:

Insert the spark plug wrench straight into the spark plug. If it is used in a tilted state, the spark plug may be broken.



Hide 19500 2.INSTALL IGNITION COIL ASSEMBLY

a.

Install the 4 ignition coils with the 4 bolts.

Torque:
7.5 N*m (77 kgf*cm, 66 in.*lbf)


b.

Connect the 4 ignition coil connectors.