Home › Engine / Hybrid System › K3-VE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002970 K3-VE ENGINE MECHANICAL _0015007 FRONT CRANKSHAFT OIL SEAL A

K3-VE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 16400 1.REMOVE RADIATOR ASSEMBLY

Hide 16361A 2.REMOVE FAN AND GENERATOR V BELT

Hide 13471 3.REMOVE CRANKSHAFT PULLEY

a.
A261730C03
1.479,1.344 1,1.729 1,1.729 0.823,1.531 true 0.333,1.396 0.604,1.396 true 3.094,0.938 3.427,1.313 0.333,0.375 10 *a 0.125,1.302 0.604,1.75 0.479,0.448 10 *b 0.802,1.781 1.354,2.135 0.552,0.354 10 SST
*a Turn
*b Hold


Using SST, hold the crankshaft pulley and loosen the crankshaft pulley bolt.

SST
09330-00021  (91651-60855)
09213-54015  

SST
09330-00021  


b.
A261731C03
1.26,0.958 0.667,0.958 true 0.531,1.813 0.771,1.813 true 3.146,1.198 3.427,1.552 0.281,0.354 10 *a 0.802,1.729 1.26,2.094 0.458,0.365 10 *b 0.365,0.885 1.031,1.24 0.667,0.354 10 SST
*a Turn
*b Hold


Using SST, remove the crankshaft pulley bolt and the crankshaft pulley.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05010, 09954-05021)


Hide 11302A 4.REMOVE TIMING CHAIN OR BELT COVER OIL SEAL

a.

Using a knife, cut off the timing chain or belt cover oil seal lip.


b.
A261491C03
0.531,1.063 0.469,1.344 true 1.823,0.885 2.115,0.604 true 0.479,0.865 0.948,1.25 0.469,0.385 10 *a 2.115,0.458 2.521,0.875 0.406,0.417 10 *1
*1 Protective Tape
*a Cut Position


Using a screwdriver with its tip wrapped in protective tape, remove the timing chain or belt cover oil seal.

NOTICE:

After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.