1.DRAIN ENGINE COOLANT
17881
2.REMOVE NO. 1 AIR CLEANER HOSE
16470A
3.DISCONNECT RADIATOR RESERVE TANK HOSE
| *A | Narrow Type |
| *B | Full Wide Type |
Disconnect the radiator reserve tank hose.
16571
4.REMOVE INLET RADIATOR HOSE
| *A | Narrow Type |
| *B | Full Wide Type |
Remove the 2 radiator hose clips, then remove the inlet radiator hose.
16572
5.DISCONNECT OUTLET RADIATOR HOSE
Disconnect the outlet radiator hose.
32941
6.DISCONNECT INLET OIL COOLER HOSE (for Automatic Transmission)
Disconnect the inlet oil cooler hose.
32942
7.DISCONNECT OUTLET OIL COOLER HOSE (for Automatic Transmission)
Disconnect the outlet oil cooler hose.
16400
8.REMOVE RADIATOR ASSEMBLY
Disconnect the cooling fan motor connector, then separate the wire harness clamp.
| *1 | Clutch Cable Bracket |
Disconnect the clutch cable from the clutch cable bracket.
| *A | Narrow Type |
| *B | Full Wide Type |
Disconnect the accelerator control cable assembly for the fan shroud.
Remove the 2 bolts and the 2 No.1 radiator brackets.
Remove the radiator assembly.
Disengage the 2 claws and remove the fan shroud sub-assembly (for Narrow radiator).
Remove the 4 bolts and the fan shroud sub-assembly with fan (for Full wide radiator).
Remove the 4 grommets from the radiator.