Home › Engine / Hybrid System › K3-VE FUEL › FUEL TANK › 2011.11–2014.04
RM19Y0E _51 Engine / Hybrid System _002972 K3-VE FUEL _0015023 FUEL TANK A

K3-VE FUEL  FUEL TANK  REMOVAL  


PROCEDURE

Hide 1. DISCHARGE FUEL SYSTEM PRESSURE

Hide 2.DRAIN FUEL

a.

Remove the drain plug, and drain the fuel into a container.


b.

Clean the drain plug and install it with a new gasket.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


Hide 77259C 4.DISCONNECT FUEL HOSE

a.
A142185

Loosen the hose clamp, then disconnect the fuel hose from the fuel delivery hose.


Hide 77203A 5.DISCONNECT FUEL SUCTION TUBE SUB-ASSEMBLY

a.
A261574C04
2.479,1.708 2.021,2.042 true 2.5,3.24 2.594,2.885 false 1.854,3.313 1.729,2.854 false 2.906,4.104 3.01,3.729 false 0.938,3.375 0.854,3.125 false 1.688,3.792 1.771,4.125 1.771,4.125 1.844,3.792 true 2.521,2.677 2.708,2.833 0.188,0.156 10 *1 2.802,4.156 2.99,4.313 0.188,0.156 10 *5 1.698,4.156 1.885,4.313 0.188,0.156 10 *4 1.625,2.656 1.813,2.813 0.188,0.156 10 *2 0.75,2.927 0.938,3.083 0.188,0.156 10 *3 1.844,2.021 2.031,2.177 0.188,0.156 10 *1
*1 Retainer
*2 Fuel Tube Connector
*3 Nylon Tube
*4 O-ring
*5 Fuel Main Tube
V100135

Pinch
V100136

Pull out


Disengage the claws and push down the retainer as illustrated.


b.

Pull the fuel suction tube (fuel tube connector) out of the fuel main tube.

NOTICE:
·

Remove any dirt and foreign matter from the fuel tube connector.

·

Do not allow any scratches or foreign matter on the parts when disconnecting them as the fuel tube connector has O-rings that seal the fuel main tube.

·

Perform this work by hand. Do not use any tools.

·

Do not forcibly bend, twist or turn the nylon tube.

·

Protect the disconnected parts by covering them with a plastic bag after disconnecting the fuel tube connector.

·

As some pressure remains in the fuel line, use a piece of cloth to prevent gasoline splashes.

·

If the fuel tube connector and fuel main tube are stuck, pinch the fuel main tube and push and pull the fuel tube connector to release them.




Hide 77213B 6.DISCONNECT FUEL TANK TO FILLER PIPE HOSE

a.
A142187

Loosen the hose clamp bolt, then disconnect the fuel tank to filler pipe hose.


Hide 77269A 7.DISCONNECT FUEL TANK BREATHER HOSE

a.
A142188

Loosen the hose clamp, then disconnect the fuel tank breather hose from the fuel inlet pipe.


Hide 77100 8.REMOVE FUEL TANK ASSEMBLY

a.
A142189

Disconnect the fuel pump connector.


b.

Hold the fuel tank using a transmission jack.


c.
A142190

Remove the 4 bolts.


d.

Operate the transmission jack, then remove the fuel tank from the vehicle.


Hide 77203A 9.REMOVE FUEL SUCTION TUBE SUB-ASSEMBLY

a.
A142191

Separate the fuel suction tube from the clamp.


b.
A261202

Remove the clamp from the fuel tank.


c.
A130590C08
1.125,3.344 0.969,3.052 false 1.813,3.292 1.677,2.917 1.677,2.917 2.031,3.292 true 3.073,3.125 2.927,2.875 false 1.917,3.958 1.854,4.167 false 3.219,3.802 3.219,4.125 false 0.521,0.448 1.188,0.229 true 1.208,0.104 1.406,0.25 0.198,0.146 10 *1 0.75,2.948 0.938,3.115 0.188,0.167 10 *3 1.479,2.823 1.667,2.99 0.188,0.167 10 *2 3.167,4.156 3.344,4.323 0.177,0.167 10 *5 1.75,4.198 1.927,4.344 0.177,0.146 10 *4 2.729,2.75 2.917,2.917 0.188,0.167 10 *1
*1 Retainer
*2 O-ring
*3 Nylon Tuber
*4 Fuel Tube Connector
*5 Pipe
V100135

Pinch
V100136

Pull out


Pinch the retainer to unlock it as illustrated, then pull the fuel suction tube (fuel tube connector) out of the fuel pump tube.

NOTICE:
·

Remove any dirt and foreign matter from the fuel tube connector.

·

Do not allow any scratches or foreign matter on the parts when disconnecting them as the fuel tube connector has O-rings that seal the fuel main tube.

·

Perform this work by hand. Do not use any tools.

·

Do not forcibly bend, twist or turn the nylon tube.

·

Protect the disconnected parts by covering them with a plastic bag after disconnecting the fuel tube connector.

·

As some pressure remains in the fuel line, use a piece of cloth to prevent gasoline splashes.

·

If the fuel tube connector and fuel main tube are stuck, pinch the fuel main tube and push and pull the fuel tube connector to release them.




d.
A142215

Remove the retainer from the fuel pump tube.

NOTICE:

If the retainer is removed from the fuel pump tube, be sure to replace the fuel suction tube with a new one.



Hide 23210P 10.REMOVE FUEL PUMP WITH MOTOR AND BRACKET ASSEMBLY

Hide 77213B 11.REMOVE FUEL TANK TO FILLER PIPE HOSE

A142194

a.

Loosen the hose clamp bolt, then remove the fuel tank to filler pipe hose.


Hide 77269A 12.REMOVE FUEL TANK BREATHER HOSE

A142195

a.

Loosen the hose clamp, then disconnect the fuel tank breather hose from the fuel tank.


Hide 77108B 13.REMOVE FUEL TANK FILLER CHECK VALVE SUB-ASSEMBLY

A142196

a.

Remove the fuel tank check valve sub-assembly from the fuel tank.


Hide 77631A 14.REMOVE CENTER LOWER FUEL TANK PROTECTOR

a.
A142197

Remove the 3 bolts and the fuel tank protector.


Hide 77141B 15.REMOVE NO. 1 FUEL TANK FLANGE REINFORCEMENT

A261203

a.

Remove the 4 No. 1 fuel tank flange reinforcements from the fuel tank.


Hide 77100B 16.REMOVE FUEL HOSE CLAMP

a.
A142199

Unfasten the claw, then remove the fuel hose clamp from the fuel tank.


Hide 77013 17.REMOVE NO. 2 FUEL TANK BREATHER TUBE SUB-ASSEMBLY

a.
A142200

Remove the 4 bolts, then remove the fuel tank breather tube from the clamp.


Hide 77380 18.REMOVE FUEL CUT OFF VALVE ASSEMBLY

a.
A142201

Remove the fuel cut off valve from the fuel tank.


Hide 77201 19.REMOVE FUEL TANK INLET PIPE SUB-ASSEMBLY

a.

Remove the fuel tank cap.


b.

Remove the 2 clips, then remove the inlet pipe cover.


c.

Remove the 2 bolts, then pull the fuel tank inlet pipe out of the fuel tank filler pipe shield.