1.DRAIN ENGINE COOLANT
16571
2.REMOVE INLET RADIATOR HOSE
16701
3.REMOVE FAN SHROUD SUB-ASSEMBLY
Disconnect the cooling fan motor connector and the wire harness clamp.
Remove the 4 bolts and the fan shroud sub-assembly with fan (for Full wide radiator).
Disengage the 2 claws and remove the fan shroud sub-assembly (for Narrow radiator).
16361
4.REMOVE FAN
| *A | Narrow Type |
| *B | Full wide Type |
Remove the nut and the fan.
16363
5.REMOVE COOLING FAN MOTOR
Remove the 3 screws and the cooling fan motor.